03 — ARTWORK
Scourging of Christ
- MEDIUM
- Bronze relief, 25 x 30 cm
- TYPE
- Religious
PALETTE
HOVER OR TAP A SWATCH FOR NAME, SHARE AND HEX. SAMPLED FROM THE IMAGE — INDICATIVE, NOT A PIGMENT ANALYSIS.
THIS REPRODUCTION DOWNLOAD THE FULL FILE ↓
- FILE
- 1400 × 1198 px · JPEG
COMMENTARY
UNDERLINED TERMS ARE DEFINED IN THE GLOSSARY.
Scourging of Christ c. 1460 BronzeAn alloy of copper (usually about 90 per cent) and tin, often also containing small amounts of other metals such as lead or zinc. Since antiquity it has been the metal most commonly used in cast sculpture because of its strength, durability, and the fact that it is easily workable - both hot and cold - by a variety of processes. It is easier to cast than copper because it has a lower melting-point, and its great tensile strength makes possible the protrusion of unsupported parts - an advantage over marble sculpture. The colour of bronze is affected by the proportion of tin or other metals present, varying from silverish to a rich, coppery red, and its surface beauty can be enhanced when it acquires a patina. reliefA sculptural work in which all or part projects from the flat surface. There are three basic forms: low relief (bas-relief, basso rilievo), in which figures project less than half their depth from the background; medium relief (mezzo-rilievo), in which figures are seen half round; and high relief (alto rilievo), in which figures are almost detached from their background., 25 x 30 cm Victoria and Albert Museum, London
The scene of the Flagellation takes place on a shallow protruding pavement marked with six orthogonals. In the centre Christ is shown bound to the columna vertical structural member having a circular cross-section and usually consisting of a base, a long shaft, and a capital..
The original setting for this relief is not known, but it was perhaps meant for private devotion in the home, or alternatively, perhaps was designed for a predellaAn Italian word for the small strip of paintings which forms the lower edge or socle of a large altarpiece (pala). Such a polyptych consists of a principal, central panel with subsidiary side and/or top panels, and a predella: the predella usually has narrative scenes from the lives of the Saints who are represented in the panels above. Because of the small size of predelle - they are not usually more than 25-30 cm high, though often relatively very wide - they were frequently used for pictorial experiments that the painter did not wish to risk making in the larger panels. The first datable example seems to be that in Simone Martini's S. Louis of Toulouse (1317, Naples). of an altarpieceA picture or sculpture that stands on or is set up behind an altar. The term reredos is used for an ornamental screen or partition, not directly attached to the altar table but affixed to the wall behind it. A diptych is an altarpiece consisting of two panels, a triptych one of three panels, and a polyptych one of four or more panels. From the 14th to 16th century, the altarpiece was one of the most important commissions in European art; it was through the altarpiece that some of the most decisive developments in painting and sculpture came about.. The dramatic poses of the flagellators show the sculptor's interest in exploring the human figure from different viewpoints. The punched decoration of the inner border is unusual for a bronze, being a feature of gold-ground panelTerm in painting for a support of wood, metal, or other rigid substance, as distinct from canvas. Until the adoption of canvas in the 15th century nearly all the movable paintings of Europe were executed on wood, and even up to the beginning of the 17th century it is probable that as much painting was done on the one support as on the other. Painters who worked on a small scale often used copper panels (Elsheimer is a leading example), and in the colonial art of South America copper and tin and even lead and zinc were used. On a larger scale, slate has occasionally been used as a support, notably by Rubens for his altarpiece for Sta Maria in Vallicella (the Chiesa Nuova) in Rome; the picture he originally painted was said to reflect the light unpleasantly and slate was used for the replacement to produce a more matt finish. For wood panels the Italian masters of the Renaissance preferred white poplar, while oak was the most common wood used in northern Europe. Many other types were used, however; analysis of the contents of art galleries has yielded a long list, including beech, cedar, chestnut, fir, larch, linden, mahogany, olive, and walnut. In the 20th century cedar, teak, and dark walnut are favourites, and modern painters have also used plywood, fibre-board, and other synthetic materials as supports. paintings.
CITE THIS RECORD — BIBTEX
@online{wga-r3f4405cc3bb4e1,
author = {Krén, Emil and Marx, Daniel},
title = {Scourging of Christ by VECCHIETTA},
organization = {{Web Gallery of Art}},
date = {2026-09-09},
url = {https://beta.wga.hu/artists/vecchietta-ra4510662765f44/scourging-of-christ-r3f4405cc3bb4e1},
urldate = {2026-09-09},
langid = {english}
}ACCESSED 2026-09-09. REPLACE THE AUTHOR FIELD WITH THE COMMENTARY AUTHOR WHERE ONE IS NAMED.
